6 Installing the SYSTEM PROGRAM
45
6 Installing the SYSTEM PROGRAM
If there is an administrator on the network, ask him/her before installing.
I
MPORTANT
• If connecting the scanner to the PC on which the controller is installed, exit the controller application after
restarting the PC.
Bringing up the display
Click
F
on the
Controller Main Display
.
→
Click
Quit The Application
.
Installation procedure
1.
Prepare the following CD.
• LS-
#
#
#
#
SYSTEM PROGRAM CD
*1
LS-
#
#
#
#
SYSTEM PROGRAM
*1
is printed on the label.
*1. The model name is shown in
#
#
#
#
.
2.
Insert the
SYSTEM PROGRAM
CD-ROM.
3.
Run the installer.
(1)
Access the
Run
display.
For Windows XP
Select
Start
→
Run
.
For Windows Vista
Select
Start
→
All Programs
→
Accessories
→
Run
.
(2)
Click
Browse
.
The
Browse
display is shown.
(3)
Select the drive to which the CD-ROM was inserted
→
Setup.exe
, and click
Open
.
LS-
#
#
#
#
SYSTEM PROGRAM CD
*1
G085386
The display slightly varies depending on the
operating system, but the procedure is the same.
S082377
