VS18/VS26
MAINTENANCE & INSTRUCTION BOOKLET
8.7.7 FD67 DeviceNet EDS file
An EDS file
is required for the setup of a DeviceNet module. The FD67 bus node supports all
the functions of the modular EDS file. To configure the FD67 system, you will always need the
EDS file for the bus node and additional EDS files for the VS18/VS26 valve island (see section
3.5 “EDS file” of the FD67 DeviceNet manual).
The EDS file is downloadable from the Norgren’s website
through your local branch of Norgren.
8.7.8 FD67 CANopen EDS file
An EDS file
is required for the setup of a CANopen module. The FD67 bus node supports all the
functions of the modular EDS file. To configure the FD67 system, you will always need the EDS
file for the bus node and additional EDS files for the VS18/VS26 valve island (see section 3.8.1
“EDS file” of the FD67 CANopen manual).
The EDS file is downloadable from the Norgren’s website
through your local branch of Norgren.
8.7.9 FD67 valve island expansion
The modular design of the VS18/VS26 valve island allows easy modifications to the number of
valves while in the field. The system allows single station expansion for up to 4 valve stations.
For more information please refer to section
The VS18/VS26 FD67 valve islands may have to be reconfigured after expansion to accept the
new number of valves. This is controlled by the DIP switch on the Fieldbus PCB (see section
8.7.10 More information on FD67
For more information on FD67 please refer to the different FD67 manuals which are
downloadable from Norgren’s website
VS2672926-KG00E_05/07 Page
86/97