Norgren VP50 IO-Link Operation Manual Download Page 11

UKLEETC002023293 

011

VP50 IO-Link

02/21

Our policy is one of continued research and development. We therefore reserve the right to amend,  

without notice, the specifications given in this document. (2019 - 9261a) © 2019 Norgren GmbH

5.0 Declaration of 

Conformity

The current EMC Declaration of Conformity can now be found on the 

Norgren Ltd website, along with all other product documentation.
Please visit: https://www.imi-precision.com/uk/en/technical-support

Norgren Ltd. 
Cross Chancellor Street, Leeds West Yorkshire, LS6 2RT, 
UK Registered in England No. 564656
Tel.: +44 (0) 1132 45 7587 
Email: [email protected]

The data specified above only serve to describe the product. No statements 

concerning a certain condition or suitability for a certain application can be derived 

from our information. The information given does not release the user from the 

obligation of exercising judgement and verification. It must be remembered 

that our products are subject to a natural process of wear and ageing. 
 
© This document, as well as the data, specifications andother 

information presented in it are the sole property of Norgren. It may not 

be reproduced or given to third parties without their consent. 
  
Printed in England.
These instructions were originally written in English.
Part No. YM50006

Summary of Contents for VP50 IO-Link













Reviews: