Norfield MFG7500, Operational Instructions

Page: 2 / 3

1
2
3
4
5
6
7
8
16
21
9
19
10
13
17
20
11
12
14
14
15
18
23
22
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 * * * * * 1/4-20 x 3/4" FHCS 12
2 * * * * * 1/4-20 x 5/8" FHCS 4
3 * * * * * 1/4-20 x 7/8" SHCS 4
4 * * * * * #10-24 X 1/2" Flat Head Cap Screw 6
5 * * * * * 5/16-18 Hex Jam Nut 16
6 * * * * * 5/16" Flat Washer 4
7 * * * * * 1/4-20 x 3" Hex Head Tap Bolt 1
8 * * * * * 1/4-20 Hex Nut 1
9 13-505 Reid STT-5T Knob 4
10 7572-002 Spacer Block 1
11 7572-004 Clamp Nut 4
12 7572-005 Clamp 2
ITEM NO. PART NUMBER DESCRIPTION QTY.
13 7572-006 Spacer Block 1
14 7572-007 Side Plate 2
15 7572-008 Top Plate 1
16 7572-009 End Plate 2
17 7572-010 Spacer 2
18 7572-011 Front Plate 1
19 7572-012 Guide Block 1
20 7572-013 Adjustment Tip 1
21 7572-014 Adj. Stop 1
22 9510-350 5/16-18 x 3-1/2" Threaded Shaft 2
23 9510-400 5/16-18 x 4" Threaded Shaft 2
4. OPERATION
A.
Slide the fixture over the door / T-astragal from the door end. Center the fixture (refer to 3 C above) and clamp
it firmly to the door. While tightening clamps, be sure the fixture stays square to the door face.
B. Begin routing with the router base firmly against the top of the fixture and the router guide and bit outside of.
fixture slot. Move router the full length of the fixture slot and the reverse direction until router guide and bit are
fully retracted from the fixture slot before lifting router base from fixture.
C.
Loosen the unlocked clamp knobs to remove the flushbolt fixture from door.