14
OPERATION
SECTION 2 OPERATION
2-1 OPERATING PROCEDURE:
ADEQUATE EYE PROTECTION MUST BE WORN WHEN OPERATING
THIS MACHINE:
Before machining any jambs, the operator must know the following information about the desired fin
-
ished product:
- Header Clearance
- Lock Height
- Strike and/or Deadbolt Dimensions
After making any required adjustments (refer to section 3, next page) the operator performs the following
steps.
• Depress the foot pedal valve to release the jamb clamps.
• Hold the jamb in position referencing it against both the edge and head stops.
• Release the foot pedal valve to clamp the jamb.
Be sure to keep your hands clear of the jamb clamps
when positioning and clamping the jamb.
• Start the router motor by depressing
both
push-button switches on the handle bars.
• Mortise for the strike plate and bolt relief. Moving the router in a counter-clockwise (climb cut) pro
-
duces better results.
• Release the push-button switches to stop the router motor.
• Depress the foot pedal valve to un-clamp and release the jamb.
