13
7
Remove and clean one cutter and head at a time.
•
Be careful not to mix up cutters and heads.They are a
matched set and if interchanged, it will greatly affect
shaving performance.
8
8
Separate the cutter from the comb.
9
Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
10
Brush the slots of the razor head.
For optimum performance, razor cutters and combs
should be cleaned in a degreasing liquid (e.g. Norelco
Razor Cleaner or alcohol) and lubricated with Norelco
Razor Lubricant, model AL80, or one drop of mineral
oil(in the center of the head).
11
Replace the cutter and razor head in the Head Assembly.
12
Repeat the process for the other two razor heads
(cutters and combs).
13
Replace the frame.
Summary of Contents for 4401
