Parts Lists
15
Nordson Corporation 1994
All Rights Reserved
108 129
Issued 3/94
Manual No. 31
−
13
Reference Numbers
The number in the REF. column indicates the number assigned to the
part in the illustration preceding the list. The code NS means the part is
Not Shown in the illustration.
Notes
A letter in the NOTE column refers to a note below the parts list which
gives additional information concerning that part.
Special attention
should be given to noted parts.
Part Numbers
Part numbers are given only for saleable parts or kits. Parts that are
not sold separately are sometimes shown for clarity.
Descriptions
Descriptions are indented to show the relationship between parts for
ordering purposes. A part indented once is a component of the top
level assembly, a part indented twice is a component of both the first
one level indented item above it and the top level assembly. For
example:
Ref.
Note
Part No.
Description
Qty.
−
000 000
Top Level Assembly
1
1
A
000 000
Assembly or Part
2
2
000 000
Subassembly or Part
1
If you order item 1, items 2 & 3 will be included.
If you order item 2, item 3 will be included.
If you order item 3, you will receive item 3 only.
Quantities
Quantities given in all parts lists except recommended spares lists are
the quantities needed to assemble the next level assembly. The code
“ASR” (As Required) is used for bulk items such as tubing, which is
ordered in increments of one foot.
7. Parts Lists
Using The Parts Lists
