Nordson Encore XL Powder, Manual

Page: 52 / 155

© 2021 Nordson Corporation
1607027-01
4-10 Setup
Typical Operating Settings
The settings listed here are approximate. You may need to adjust these settings to obtain
the desired results.
Operating Air Pressures
Refer to Table 4-1 for a list of typical operating air pressures. These settings are average
starting points. You may need to adjust these settings depending on your application.
Table 4-1 Typical Operating Air Pressures
Air Pressure Setting
Input (Minimum) 6 bar (90 psi)
COLLECTOR PULSE 2.75 bar (40 psi)
COLLECTOR FLUIDIZE 0.5 bar (8 psi)
HOPPER FLUIDIZE 0.3 bar (5 psi)
COLLECTOR TRANSFER 2.75 bar (40 psi)
LANCE FLUIDIZE 0.3 bar (5 psi)
Cartridge Filter Pulse Valve Timing Settings
Refer to Table 4-2 for typical pulse valve timing settings. These settings are average
starting points. You may need to adjust the settings if the feed center’s cartridge filters are
not being pulsed sufficiently.
Table 4-2 Table 3-3 Typical Pulse Valve Timer Board Settings
Timer Setting
Filter Pulse On Duration 0.07 seconds
Filter Pulse Off Duration 10 minutes