Nordson Coolwave 610, Customer Product Manual

Page: 35 / 44

Parts
6-1
Part 1074165A02
E 2010 Nordson Corporation
Section 6
Parts
Introduction
To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use this
five-column parts list, and the accompanying illustration, to describe and locate parts correctly.
Using the Illustrated Parts List
Numbers in the Item column correspond to numbers that identify parts in illustrations following each parts
list. The code NS (not shown) indicates that a listed part is not illustrated. A dash (—) is used when the part
number applies to all parts in the illustration.
The number in the Part column is the Nordson Corporation part number. A series of dashes in this column
(- - - - - -) means the part cannot be ordered separately.
The Description column gives the part name, as well as its dimensions and other characteristics when
appropriate. Indentions show the relationships between assemblies, subassemblies, and parts.
S
If you order the assembly, items 1 and 2 will be included.
S
If you order item 1, item 2 will be included.
S
If you order item 2, you will receive item 2 only.
The number in the Quantity column is the quantity required per unit, assembly, or subassembly. The code
AR (As Required) is used if the part number is a bulk item ordered in quantities or if the quantity per
assembly depends on the product version or model.
Letters in the Note column refer to notes at the end of each parts list. Notes contain important information
about usage and ordering. Special attention should be given to notes.
Item Part Description Quantity Note
— 0000000 Assembly 1
1 000000
S
Subassembly 2 A
2 000000
S S
Part 1