Nordson 765105, Manual, Page: 31 / 58

Operation
4-1
E
2001 Nordson Corporation
All rights reserved
Gun Controller
Issued 03/01
P/N 768603B
Section 4
Operation
WARNING: Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
By pressing the test key on the front panel the outputs of the unit can be
manually turned on.
When in test mode the display shows this by displaying 11 in the left--
hand digit positions 110000.
Pressing the 0 key turns all the outputs on, the display would show
111111 pressing the key again turns all the outputs off.
Pressing any of the numeric keys 1 to 4 will turn the corresponding output
on, for example pressing key 2 the display would show 110010 pressing
the key again will turn the Output off.
Press the RUN key to return to normal Operating mode.
Press the SET key. The unit displays PAS000 with the right--hand digit
flashing. Type the operator’s passcode and press ENTER. Entry of
incorrect passcode will select normal running.
The unit displays 110000. Type in the value for OUTPUT 1 DELAY TO
ON COUNTS and press ENTER.
The unit displays 100000. Type in the value for OUTPUT 1 EXTEND
COUNTS . The display can be changed to read 1_0000 by using the SET
key this now signifies part shortening the RUN key will revert to part
extend operation, and press ENTER.
The unit displays 210000. Type in the value for OUTPUT 2 DELAY TO
ON COUNTS and press ENTER.
The unit displays 200000. Type in the value for OUTPUT 2 EXTEND
COUNTS . The display can be changed to read 2_0000 by using the SET
key this now signifies part shortening the RUN key will revert to part
extend operation, and press ENTER.
1. Test Mode
2. Programming