Nordson 1006453A, Customer Product Manual, Page: 16 / 24

Ejector Gun Controller 12
E
2001 Nordson Corporation
All rights reserved
1006453A
Issued 6/01
Manual 25-23
SETUP Menu
Refer to Table 4 to navigate the SETUP menu. Access the SETUP menu
when you need to enter data to adjust the length of time allotted for
Ejector gun refill and dispense.
NOTE: To perform functions in the SETUP menu, you must enter an
access code. Contact your Nordson Corporation representative if you do
not have the proper access code.
Table 4 SETUP Menu Navigation
When: You Will See This Message: Then:
You enter the SETUP menu
LIMITED ACCESS CODE
Enter your
access code
to
continue.
Your access code is accepted
Valid Code Access
Permitted
Then, you will see this menu:
1. REFILL TIMER
2. DISPENSE TIMER
Access the menu you need to make
adjustments.
You enter the REFILL TIMER menu
Refill Time
XX.XX Sec
Using the numeric keys on the
keypad, make the necessary
adjustments to the refill time
settings.
You enter the DISPENSE TIMER
menu
Dispense Time
XX.XX Sec
Using the numeric keys on the
keypad, make the necessary
adjustments to the dispense time
settings.
DIAG (Gun Status) Screen
Refer to Table 5 for information to help you navigate in the
DIAG (Gun Status) screen.
Table 5 DIAG (Gun Status) Screen Functions
Press To
1 Access the Gun #1 screen and view gun load and
dispense fault status
2 Access the Gun #2 screen and view gun load and
dispense fault status
3 Access the Gun #3 screen and view gun load and
dispense fault status
4 Access the Gun #4 screen and view gun load and
dispense fault status