7
1. Place the Uprights (101) near the front of the
Base Frame (56) as shown.
As you slide the Uprights (101) onto the Base
Frame (56), insert the Frame Wire Harness
(130) into the large hole in the Uprights.
Be
careful to avoid pinching the wire.
Align the holes in the Uprights (101) with the
holes in the Base Frame (56).
101
56
130
1
Hole
RIGHT
LEFT
2
2. Locate the Frame Wire Harness (130) and
Upright Wire Harness (137) in the Upright (101)
access hole.
Connect the Frame Wire Harness (130) and
Upright Wire Harness (137) at the front of the
Uprights (101).
See the inset drawing. The
connectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER.
Attach the Access Plate (127) to the Uprights
(101) with two #8 x 1/2" Machine Screws (134).
127
130
137
134
101
130
137
