11
10. Attach the Console (102) with four #8 x 3/4"
Screws (29).
Start all four Screws, and then
tighten each of them. Do not overtighten the
Screws.
Tighten the four loops around the wires by
pulling on the ends of the ties.
See step 6.
Tighten the 5/16" x 2 3/4" Bolts
(51).
10
29
29
102
Ties
Ties
9. Have a second person hold the Console (102)
near the Console Cover (104). Insert the wires
from the Console through the indicated hole.
Connect the Upright Wire Harness (137), the
Left and Right Pulse Wires (107, 109), and the
Ground Wire (116) to the wires extending from
the Console (102).
See the inset drawing. The
connectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER.
9
102
104
109
137
Hole
107
137
Console Wire
Wires
116
