10
10. With the help of a second person, hold the con-
sole assembly near the handrail assembly.
Be
careful not to pull on the wires during
assembly.
Connect the Handrail Wire (86) and then the
Pulse Wire (88) to the wires from the console.
The connectors should slide together easily
and snap into place.
If they do not, turn one
connector and try again.
IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER.
Set the metal bracket on the console assembly
onto the metal frame inside the handrail assem-
bly.
Be careful not to pinch the wires.
Attach the console assembly with two 3/8" x
2 1/2" Screws (4) and two 3/8" Star Washers
(12).
Start both Screws, and then tighten
them.
Console
Assembly
Console
Wire
Handrail
Assembly
10
86
88
Metal
Bracket
12
12
4
4
9. Insert the wires into the Left Upright (89) as you
set the handrail assembly on the Left and Right
Uprights (89, 90).
Be careful not to pinch the
wires.
Attach the handrail assembly with the four 3/8" x
2" Screws (3) that you removed in step 6 and
four 3/8" Star Washers (12).
Start all four
Screws, and then tighten them.
9
Wires
12
3
12
89
90
3
Handrail
Assembly
Console
Wire