10
5. Place the treadmill in the storage position and
make sure that the latch pin is engaged as de-
scribed on page 27.
Position the Base Plate (97) on the treadmill as
shown. Attach the Base Plate to the Uprights
(43) with three 3/8" x 2" Bolts (3). Note: It may
be helpful if a second person tips the treadmill
slightly as you tighten the Bolts.
Lower the treadmill as described on page 27.
5
97
3
43
6. Make sure that the Left Accessory Tray (112)
and the Right Accessory Tray (117) are pressed
firmly into the console assembly.
8.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 29).
To protect the floor or car-
pet from damage, place a mat under the treadmill.
6
Console
Assembly
112
117
7. Note the location of the 75 ohm terminal and the
audio/video input jack on the treadmill. For the
television to operate, the 96" A/V Wire (84) must
be connected to the audio/video input jack on the
treadmill or a CATV cable or an antenna must be
connected to the 75 ohm terminal (see page 12).
7
Audio/Video
Input
84
75 Ohm
Terminal