NordicTrack NTIVEX70414.0, User Manual

Page: 7 / 16

7
STEP 3
3.1 : Please remove the adjuster par (5) from the main frame
(11).
3.2 : Release the screw from the lower sleeve and take of the
sleeve from the handlebar post but do not take the sleeve off the
lower sensor wire.
3.3 : Insert the hand post (1) into the main frame (11), then
choose the desired position and tighten the adjuster par (23).
Be sure the adjuster par is always tightened.
3.4 : Attach the handlebar (4) to the hand post (1) using the one
flat washers (6) adjuster par (5).
3.5 : Put the sleeve into the handlebar post.
3.6 : Set up the screw for the sleeve
Remarks: When you have chosen a desired position, tighten the handlebar post knob until you hear a “click”.
STEP 4
1. Connect the lower sensor wire (45) and the
upper sensor wire (10) in the handlebar post.
2. Double check the sensor wire are OK to con-
nection.
STEP 5
1. Connect the upper sensor (10) then at-
tach the computer (7) to the computer bracket
2. Remove the pre-installed Screws (22) on
the main frame (11), and then assemble the
Bottle holder (21) by Screw (22).
Now, your machine is ready for use.
10
45
1
2
6
5
1
4
1
11
11
7
8
10
22
21
11
7
8
10
22
21
11