background image

5

ASSEMBLY

Assembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.  

Assembly requires the included tools and your own adjustable wrench                     . 

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the
quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is
not in the parts bag, check to see if it has been pre-assembled.

M6 Split

Washer (57)–4

M6 Nylon

Locknut (71)–4

M6 Flat

Washer (67)–4

M10 Split

Washer (87)–4

Console

Washer (93)–4

M6 x 16mm

Button Screw (68)–8

M4 x 16mm

Screw (64)–1

M6 x 12.7mm

Button Screw (62)–4

M8 Flat Washer

(89)–4

M6 x 35mm

Screw (70)–4

Console

Screw (63)–4

M10 x 25mm

Screw (88)–4

8

88

87

87

1. Attach the Stabilizer (8) to the Frame (1) with four

M10 x 25mm Screws (88) and four M10 Split
Washers (87).

1

1

Summary of Contents for NTEX04900

















Reviews: