12
15.
The adjustable cushions are shipped at their firmest settings. Adjust each cushion to a softer setting
before using the treadmill (see page 27).
16.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plas-
tic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 30 and 31).
14. Remove the packaging material from the bottom
of the Frame (56).
see the inset drawing.
Make sure that the 1/2"
Rear Leveling Foot Nuts (30) are threaded all of
the way onto the Rear Leveling Feet (60). Then,
turn the two Rear Leveling Feet all of the way
into the Frame (56).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 28).
If one of the Rear Leveling Feet (60) doesn’t
rest flat on the floor, turn the Rear Leveling Foot
until it rests on the floor, and then tighten the
1/2" Rear Leveling Foot Nut (30) against the
Frame (56).
14
56
56
60
60
60
30
13. Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (11). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
13
53
11
56
6