8
6. Apply grease to an M10 x 95mm Bolt (27).
Attach the Seat Support (8) to the Seat Frame
(7) with the Bolt and an M10 Locknut (29).
Do
not overtighten the Locknut; the Seat
Support must pivot easily.
Then, attach the Seat (4) to the Seat Frame (7)
with four M6 x 15mm Screws (22).
6
8
27
4
29
22
22
7
7. Apply grease to an M10 x 115mm Bolt (26).
Attach the Seat Frame (7) to the Frame (1) with
the Bolt and an M10 Locknut (29). Set the end
of the Seat Support (8) in one of the slots in the
Frame Bracket (15).
Do not overtighten the
Locknut; the Seat Frame must pivot easily.
7
7
8
15
1
29
26
Grease
5. Apply grease to an M10 x 190mm Bolt (23).
Attach the Backrest Frames (10) to the Frame
(1) with the Bolt and an M10 Locknut (29). Set
the end of the Backrest Support (9) in one of
the slots in the Frame Bracket (15).
Do not
overtighten the Locknut; the Backrest
Frames must pivot easily.
See step 4. Tighten the M10 Locknut (29)
and the six M6 x 55mm Screws (20). Do not
overtighten the Locknut; the Backrest sup-
port (9) must pivot easily.
5
10
1
15
29
9
Grease
Slot
Slot
23
8.
Make sure that all parts have been properly
tightened before you use the weight bench.