24
6. Measure your heart rate if desired.
Before using
the handgrip
heart rate moni-
tor, remove the
sheets of plastic
from the metal
contacts on the
pulse bar. In ad-
dition, make sure
that your hands
are clean.
To measure your heart rate,
stand on the foot
rails
and hold the pulse bar with your palms on the
metal contacts;
avoid moving your hands.
When
your pulse is detected, a heart symbol in the calorie
display will flash each time your heart beats, one
or two dashes will appear, and then your heart rate
will be shown.
For the most accurate heart rate
reading, continue to hold the contacts for about
15 seconds.
7. Turn on the fan if desired.
The fan features multiple speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the fan buttons
repeatedly to select a
fan speed or the auto
mode, or to turn off the
fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero.
The
incline must be at zero or you may damage the
treadmill when you fold it to the storage posi-
tion.
Next, remove the key from the console and
put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord.
IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
Contacts
Summary of Contents for 831.24988.2
Page 5: ...5 ...
