19
22.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic.
To protect the floor or carpet, place a mat under the treadmill.
To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32). Note: Extra parts may be
included.
21. Attach the upper end of the Storage Latch (53)
to the bracket on the Latch Crossbar (38) with a
5/16" x 2 1/4" Bolt (3) and a 5/16" Nut (12).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 29).
20. Orient the Storage Latch (53) so that the decals
are facing away from the treadmill as shown.
Attach the lower end of the Storage Latch (53) to
the bracket on the Base (94) with a 5/16" x 1 3/4"
Bolt (6) and a 5/16" Nut (12).
Raise the Storage Latch (53) to a vertical posi-
tion. If there is a tie (G) and spacer (H) in the top
of the Latch, remove and discard them.
38
94
53
6
3
Decals
Large
Barrel
12
56
12
H
53
20
21
G
Summary of Contents for 831.24988.2
Page 5: ...5 ...
