10
7. Identify the Left Base Cover (88) and the Right
Base Cover (89).
Slide the Left Base Cover (88) onto the Left
Upright (81). Slide the Right Base Cover (89)
onto the Right Upright (82).
89
82
81
88
7
8. Hold the Console (98) near the Console Base
(101). Connect the two indicated ground wires.
Next, connect the two indicated wire harnesses.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, insert the wire harnesses
into the indicated hole.
Ground
Wires
101
Hole
98
8
Wire Harnesses
Wire
Harnesses
