9
NORDIC
CHARGING THE BATTERY
This lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the
battery pack. A fully discharged battery pack with a temperature between 0°C and 40°C will charge in
about 1 hour.
Plug the charger adapter into power source. The green light on the charger stand will illuminate, indicating
the charger is powered.
Slide the battery all the way into the charger stand. The red light on the charger stand will illuminate,
indicating that the battery is charging.
The red light will go off after charging is complete and a green light will appear.
NOTE: Batteries may become warm while charging. This is normal. If the battery is hot after continuous use in the
tool, allow it to cool down to room temperature before charging. This will extend the life of your batteries.
WARNING: Always disconnect the battery pack from the tool before any assembly, adjustments or
changing accessories.
INSERTION AND REMOVAL OF RECHARGEABLE BATTERY
Depress the battery-release button located on the front of the battery pack to release battery pack.
Pull the battery pack out and remove it from the tool.
Warning!
Always remove the battery pack before making adjustments to the equipment.
Be sure to read the following information before you put the cordless equipment into operation:
• Charge the battery pack with the charger. An empty battery pack requires a charging period of
approximately 0.5 to 1 hour.
STARTING THE MACHINE
To start the equipment, depress the main switch 1 first, then press safety switch and pull the
switch trigger.
STOPPING THE MACHINE
， To switch the appliance off, release the switch trigger.
TRIMMING PROCEDURES
When properly equipped with a debris shield and string-head, your unit will trim unsightly weeds and tall grass
in those hard-to-reach areas - along fences, walls, foundations and around trees. It can also be used for scalping
to remove vegetation down to the ground for easier preparation of a garden or to clean out a particular area.
