background image

4

NORDIC

•  Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner 

intended for the particular type of power tool, taking into account the working conditions and the work which needs 
to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.

2.5 SERVICE

Your power tool should be serviced by a qualified specialist using only standard spare parts. This will 
ensure that it meets the required safety standards.
a) Use only the manufacturer’s recommended replacement parts and accessories.
b) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
c) When not in use, store the machine out of the reach of children.

SPECIAL SAFETY INSTRUCTIONS FOR GRASS TRIMMER

•  This trimmer is ideal for trimming lawn edges and small lawn areas in private gardens. The trimmer 

should not be used in public gardens, parks, sports grounds, streets etc. and in farming and forestry.

•  Because of possible accidents the trimmer must not be used for: 

- trimming of bushes and hedges  
- cutting of flowers

•  For safety reasons, the trimmer is not for use by persons below 16 years of age and persons who are 

not familiar with its handling.

•  Always check the good working order of the trimmer which, if not adequate, could endanger the user.
•  Do not use the trimmer if the cutting device is not secured properly or is damaged.
•  Before starting the trimmer, make sure that the nylon line is not touching stones or debris.
•  Always wear suitable clothing when using the trimmer to prevent head, hand or feet injuries. 
•  When the trimmer is in operation, keep the cutting section away from all parts of the body.
•  Do not start the trimmer when it is upside down or when not in working position.
•  Do not let other people or animals come within 5 metres of the trimmer when in use.
•  Remain in a stable and secure position while operating the trimmer.
•  Do not cut against hard objects. This could cause injury or damage the trimmer.
•  Use the edge of the guard to keep the trimmer away from walls, surfaces, miscellaneous things and 

delicate objects.

•  Never use the trimmer without the guard.

CAUTION! The guard is vital for your and other peoples’ safety and for the good working order of the 
trimmer. The failure to observe these safety regulations are not only dangerous but also annuls the 
guarantee terms.

Summary of Contents for GT-B0218













Reviews: