User Guide
P.3
Disabling Alarm Valet Mode
1.
Turn the ignition key to the
IGNITION ON (RUN)
position
.
2.
Within 5 sec. press the valet button and hold it down for 4 seconds.
3.
The siren will chirp
twice
to confirm that the module has exited alarm valet mode.
Note:
the L.E.D. will go out to indicate that alarm valet mode is disabled.
Remote Valet Operation
The module may be placed in or out of alarm valet mode using the remote control: the user does not need to enter the vehicle nor access
the ignition switch to place the vehicle in or out of alarm valet mode.
To remotely place the module in or out of alarm valet mode:
•
Press and hold the
LOCK
+
UNLOCK
buttons down together for 4 seconds –the system will toggle in and out of alarm valet mode:
o
Getting into alarm valet mode: the parking lights will flash
once
and the horn or siren will honk/chirp
once
(the L.E.D. will stay on).
o
Getting out of alarm valet mode: the parking lights will flash
twice
and the horn or siren will honk/chirp
twice
(the L.E.D. will go out).
Multi-Car Operation
The system features multi-car operation, allowing the user to operate two different vehicles with a single remote control. (Both vehicles
must be equipped with an identical module.) The remote control of the primary vehicle can control the starter kill, the door locks (including
driver’s door priority access) and the
AUX
2
and
AUX
3
outputs on the second vehicle. The remote control of the second vehicle can also
operate the primary vehicle.
Second vehicle control:
•
TRUNK
+
LOCK
............................................................................................
LOCK
•
TRUNK
+
UNLOCK
.......................................................................................
UNLOCK
•
TRUNK
+
AUX
..............................................................................................
AUX
2
•
TRUNK
+
LOCK
+
UNLOCK
for 3 sec ............................................................in or out of alarm valet mode
•
TRUNK
+
LOCK
+
AUX
.................................................................................
AUX
3
Diagnostics - Parking Lights Flash Rate
FLASHES &
CHIRPS
RATE
DESCRIPTION
1
Quick
The system has entered alarm valet mode
1
Quick
Doors locked by remote, system armed, starter kill armed
2
Quick
The system has exited alarm valet mode
2
Quick
Doors remotely unlocked, system disarmed, starter kill armed (dome light on)
5
Quick
New transmitter learnt
5
Quick
Car finder
8
Quick
Unit reset: this occurs when the module is reset to its factory default values
