How to use the device
The device should only be used, if the reflector is placed in its spot. Without the reflector it may
result in overheating the device.
Adjust the heat with the knob. Turn the knob to the right from MIN to MAX. Lighting of the
indicator indicates that heating process is started. The product will now be heated to the
selected warmth. The Indicatorlamp and heating element will turn off, when the selected heat
is acheved, and turns on, when the temperatur falls with 30%. The heat is controlled with the
knob in front. After coocking is finished turn the knob to MIN and the grill will turn off.
Always unplug the power cord, after cooking food.
Cleaning
1. Before cleaning the barbecue, it is necessary to unplug the power cord.
2. Let the barbecue cool down.
3.
Use a piece of wet cloth to clean exterior and power base of the barbecue, and then dry
these parts with a piece of dry cloth. Especially ensure that the power base is completely
dry. Never use coarse cleaning objects, or otherwise the barbecue body will be ground.
Grill rack
(3 position)
Heating element
(spiral filament)
Thermostat
Aluminum
reflector
Base
Contol switch
Control indicator
lamp
Foot
Plug
MAIN PARTS OF BEAUMONT ELECTRIC GRILL
DO NOT USE THE GRILL BEFORE WATER IS POURED INTO THE
GRILL BODY. Make sure the water level is between min and
max. The oil tray should float on the water.
In order to avoid overheating, this appliance shall not be covered by any solid or
flexible material such as an aluminum tray, aluminum foil or trays made of other
heat resistant material. The use of such items or materials on the grill would impair
the safety of your product and could lead to serious damage.
Do not use the grill close to water, pool or similar.
3
