background image

5

 

● Read page 3 for correct amount of charcoal/briquettes.

 

● Do not overfill the grill with charcoal/briquettes. The grill can get too hot for cooking 

and the heat can represent a risk to people or animals in the vicinity.

 

● Using too much charcoal can also damage the grill surface and thus the paint 

enamel. .Paint and enamel are applied to protect the grill and damage can cause 

rust.

 

● The grill can be extremely hot when in use. Use grill gloves when grilling.

 

● If flames should appear during use - due to fat, marinade or the like dripping on to the 

charcoal - we recommend using a spray bottle to spray a little water on the charcoal.

 

● When finished using the grill, do not douse the charcoal with large amounts of COLD 

water, as this can damage the paint/enamel. Use sand or spray small amounts of 

water gradually and repeatedly.

 

● Always check that all embers are extinguished before removing used charcoal/

briquettes. This can take up to 24 hours. Always dispose of ash and charcoal residue 

where they cannot cause fire.

 

● To make cleaning easy, cover the insides of the grill with aluminium foil before pouring 

charcoal in. The shiny side of the foil should be up. Remember to make holes in the foil 

for ventilation where necessary.

 

● Clean the grill grate with hot soapy water immediately after grilling. Dry the grate well 

and store in a dry place when not in use. We recommend coating the grate with food 

oil after cleaning, between each grilling and before storing.

 

● When storing the grill outdoors, keep it covered with a grill cover. Alternatively, the grill 

can be stored indoors, in a garage or under a roof.

 

WARNING!

 Always check that all the charcoal is extinguished and that there are no 

embers left before putting a cover or on putting the grill away for storage.

 

● It is very important that the grill is totally dry before putting a cover on. Any dampness 

shut inside the grill cover can cause condensation and thus rust.

 

● It is important that grill and grates are cleaned after every use and before putting 

it into long-term storage. Residues of marinade, oils, fat etc. can cause mould and 

accelerate rust.

 

● We recommend repairing cracks or scratches in the paint or enamel with heat resistant 

paint as soon as possible. Stocked by ironmongers, builder’s merchants, paint shops, 

workshops etc. Repair any rust as soon as possible before it spreads.

DURING GRILLING

MAINTENANCE

Summary of Contents for CO202000













Reviews: