Report check list
SO NUMBER ..................................................................
DATE ......................................................
This sheet must be completed by the commissioning engineer after the heater has been started for the first time.
TO BE RETAINED IN THE MANUAL
CUSTOMER
HEATER TYPE
SERIAL No
BMS CONTROLLER TYPE
HEATER ADDRESS
CUSTOMER UNIT REFERENCE
TEST / COMMISSIONING / SERVICE
FAN BALANCE/VIBRATION
FAN BEARING/GREASE
MOTOR BEARING/GREASE
PROFILE PLATE DRIVE/FREE
PROFILE DAMPER SLIDE RAILS/GREASE
PROFILE DAMPER LIMIT SWITCH/OPERATION
PROFILE DAMPER DRIVE LINKAGE
PROFILE DAMPER DRIVE MOTOR
DRIVE BELT/CONDITION
BURNER GAS PORTS/RE-DRILL
BURNER MIXER PLATES/REPLACE
FLAME PROBE/REPLACE
SPARK PROBE/REPLACE
INTERNAL CASING CONDITION
EXTERNAL CASING CONDITION
INTAKE/GRILLES/CLEAN
FILTERS IF APPLICABLE
DISCHARGE GRILLES
SPARK PROBE CAP AND LEAD/CLEAN/REPLACE
FLAME PROBE CAP AND LEAD/CLEAN/REPLACE
CONTROL PANEL GENERAL
CONTROL PANEL WIRING/SOUNDNESS
INDICATOR LAMPS
FAN ROTATION
SUPPLY WIRING GENERAL
Engineer .................................................................................