nord B 1050, Operating And Assembly Instructions Manual

Page: 103 / 112

7 Appendix
B 1050 en-4419 103
7.3.3 Lubricant quantities
The filling quantities listed in the tables below and the specifications on the name plate are guide
values. The precise quantities vary depending on the exact gear ratio and options that may be present
(e.g. OSG, OST, OT). Make sure by visual inspection (see section 4.1 "Oil level and venting") that the
oil level is correct. Correct the oil level if necessary (see section 5.2.3 "Oil level").
Information
After changing the lubricant, and in particular after the initial filling, the oil level may change during the
first few hours of operation, as the oil galleries and hollow spaces only fill gradually during operation.
Check and, if necessary, correct the oil level after 2 hours of operation.
7.3.3.1 Helical gear units
1)
Lubricant circulation (Option LC)
2)
Lubricant circulation (Option LCX)
3)
Full oil level (Option OT)
[L] M1 M2 M3 M4 M5 M6 OT
SK 5207 / 5307 21 31 26 39 37 37 54 3)
SK 6207 / 6307 26 37 32 45 42 42 63 3)
SK 7207 / 7307 36 45 36 58 46 46 98 3)
SK 8207 / 8307 44 55 48 75 57 57 106 3)
SK 9207 / 9307 57 71 73 76 74 74 150 3)
SK 10207 / 10307 72 89 90 96 92 92 180
3)
SK 11207 /11307 105 130 50 2) 105 140 40 2) 135 1) 45 2) 135 1) 45 2) 193 3)
SK 12207 / 12307 116 185 83
2)
149 203 65
2)
199
1)
69
2)
199
1)
69
2)
268
3)
SK 13207 /13307 154 256 107 2) 201 290 73 2) 268 1) 95 2) 268 1) 95 2) 353 3)
SK 14207 /14307 225 374 156 2) 291 424 107 2) 392 1) 139 2) 392 1) 139 2) 531 3)
SK 15207 /15307 358 415 160 2) 314 450 125 2) 405 1) 170 2) 412 1) 163 2) 550 3)
Table 18: Lubricant quantities for helical gear units