nord 6051302, Operating And Assembly Instruction Manual

Page: 9 / 72

Table of Contents
B 1091 en-2722 9
1 General
Pos: 11 /Anl eitungen/M otoren/B1091 Drehstromm otoren/1. Allgem eines/!1! Allgem eines_Inhalt @ 7\m od_1431330112564_388.docx @ 217304 @ @ 1
These operating instructions must be read before NORD motors are transported, installed,
commissioned, serviced or repaired. All persons who are involved in these tasks must observe these
operating instructions. In order to prevent injury or damage, all of the safety information in these
operating instructions must be strictly observed.
The information and instructions in the instructions, safety and commissioning information which is
supplied, as well as all other instructions must be observed.
This is essential to prevent injury and damage.
The applicable national, local and plant-specific regulations and requirements and regulations must be
observed.
Technical details may vary for special designs and constructions. In case of doubt, we urgently
recommend that the manufacturer is contacted, giving details of the type designation and the
motor number.
Qualified personnel are persons who due to their training, experience and instruction, and their
knowledge of the relevant standards, accident prevention regulations and operating conditions are
authorised to carry out the necessary activities.
This also includes knowledge of first aid measures and the local emergency services.
It is assumed that the work for transport, assembly, installation, commissioning, maintenance and repair
will be performed by qualified staff.
In particular, the following must be observed:
• Technical data and information regarding permissible use, installation, connection, ambient and
operating conditions, which are contained in the catalogue, the order documents and other
documentation for the product.
• Local and plant-specific regulations and requirements
• Correct use of tools, lifting and transportation equipment
• Use of personal protective equipment
For reasons of clarity, the operating instructions do not contain detailed information about possible
versions and therefore do not consider all possible cases of installation, operation or servicing.
Because of this, these operating instruction essentially only contain the information which is necessary
for proper use by qualified personnel.
In order to prevent faults it is necessary that the prescribed service and inspection work is carried out
by appropriately qualified personnel.
• For the operation on an inverter, the planning guideline B1091-1 forms a part of these operating
instructions.
• The supplementary operating instructions must be observed if an external fan is present.
• For braking motors, the supplementary brake operating instructions must be observed..
If the operating instructions or the planning guide are lost for any reason, these documents must be
obtained from NORD.
Pos: 12 /Allgem ein/Allgem eing ültige M odul e/---------- Seitenum bruch ---------- @ 1\m od_1329145698658_0.docx @ 15891 @ @ 1