w w w . h a w k e y e e l e c t r o n i c s . c o m
N
OTICE
:
Some boats have a hollow space between the floor and the
hull bottom called a bilge. The H22FX
will not “Shoot
-
Thru” in
this type of boat unless it is placed directly against the hull
surface that is in direct contact with the water.
“
SHOOTING THROUGH
”
ICE
I
MPORTANT
:
This unit may be used for ice fishing, but special attention must
be paid to not allow the unit to freeze to the ice, as removal
may cause damage to the LED light housing.
This device has advanced sonar capabilities also allow it to obtain depth and fish reading
through solid ice. You MUST use special techniques to obtain readings through ice:
N
OTICE
:
The ice must be smooth and free from excessive air.
Air will show up as white imperfections inside the ice.
The ice must be black in color.
To Shoot Thru Ice:
1. Clear away snow to expose the ice surface.
2. Place a small amount of liquid water on the ice and set
the transducer side of the device on the water.
3. If there are any air pockets between the device and
ice, or the water below the ice, the device will not work
properly and will require you to try another spot, or cut
a hole in the ice to use.
I
NFORMATION
:
You can also use the “Plastic Bag” and “Petroleum Jelly” instructions in
the “Shooting Thru a Boat Hull” section for shooting through ice. Visit
our website for additional suggestions.
SC ANNING FOR DEPTH C H ANGES OR FISH (SIDE -SC AN)
The device has the ability to be used as a sideways scanning sonar depth
finder/fish finder to search for drop-offs and hiding fish under docks, weeds, or
vegetation.
