w w w . h a w k e y e e l e c t r o n i c s . c o m
W
ARNING
:
Never mix different brands of batteries. Never mix new and used
batteries
(alkaline, lithium, argon zinc, & rechargeable).
Never
use damaged batteries. REMOVE BATTERIES DURING
STORAGE. REMOVE DEAD BATTERIES IMMEDIATELY.
N
OTICE
:
If you are going to be using the H22FX in temperatures below
20º F (-
7 ºC) you must use Lithium ‘AA’
batteries. Cold
temperatures significantly reduce the power output of Alkaline
batteries, which will inhibit the performance of the device.
CH ANGING THE LED LENS COLOR
The H22FX is supplied with 4 interchangeable lenses that allow you to choose
between white, red, blue, & green flashlight colors. To use it as a fish attractor,
simply hang it off the side of your vessel while night fishing.
White:
The best all around light color. It’s high
intensity makes it great for general use or as a fish
attractor.
Red:
Use to help preserve night vision when map
reading or for general lighting at night.
Blue
: Great for attracting fish in deep blue ocean
water or for slightly murky water.
Green:
Great for attracting fish in fresh, brackish or murky water.
To Change Lens Color:
1.
Unscrew the flashlight “Lens Cover” counter clockwise and remove it
from the housing.
2.
Lubricate the “Lens
Cover” O
-Ring with silicon grease.
3. Install the colored
“Lens Cover” by tightening it in the clockwise direction
until snug. DO NOT over-tighten.
I
MPORTANT
:
To ensure the H22FX remains watertight, make
sure the lens cover o-ring is coated with silicon
grease (available at any dive shop).
Flashlight
Lens
