Owner’s Manual 11
Remove the Refrigerator
Your dealer or an authorized Norcold Service Center must do this procedure.
The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions when working on
the refrigerator, be careful and wear cut resistant gloves.
1. Turn off Power and remove the DC wiring from the refrigerator:
- Remove the DC wiring from the battery or the converter of the vehicle.
- Put a mark on the DC wires so you can put them back in the correct location.
2. Remove the screws which fasten the refrigerator to the enclosure.
3. Remove the door from the refrigerator.
4. Remove the screws which fasten the refrigerator to the wall.
5. Remove the refrigerator from the opening.
6. Attach the door to the refrigerator.
CAUTION
!
NOTICE
Reinstall the Refrigerator
Your dealer or an authorized Norcold Service Center must do this procedure.
1. Push the refrigerator completely into the enclosure.
2. Remove the door from the refrigerator.
3. Put the screws though the mounting flanges and into the wall.
4. Attach the door to the refrigerator
The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions when working on
the refrigerator, be careful and wear cut resistant gloves.
5. Connect the DC wiring to the refrigerator:
- Install the DC fuse or connect the DC wiring to the battery or the converter.
- Connect the DC wires from the refrigerator.
NOTICE
CAUTION
!
Replacement Parts
You may purchase replacement parts through your local RV dealer or an authorized Norcold Service Center.