Owner’s Manual 8
It is normal for frost to collect on the freezer plates of the refrigerator. Excess frost decreases the cooling performance of the
refrigerator. Defrost the refrigerator as necessary:
- Put the thermostat in the “0 - OFF” position.
- Remove all food from the refrigerator.
Defrosting the refrigerator makes excess water inside the refrigerator.
- Put dry towels (etc.) inside the refrigerator to absorb the water.
- Put trays of hot water in the freezer until the frost is melted.
- Empty the drip tray in either of these two ways:
- Pull the drip tray forward to remove it from the refrigerator.
- Remove the wet towels (etc.) and dry the interior.
- If removed, put the drip tray in the refrigerator.
- Put all food in the refrigerator.
- Put the power switch / thermostat at the temperature setting that you wish.
Cleaning:
A good time to clean the refrigerator is just after you defrost it.
Do not use abrasive cleaners, chemicals, or scouring pads because they can damage the interior of the refrigerator.
- Wash the interior with a mild cleaner or a solution of liquid dish detergent and warm water.
- Rinse with a solution of baking soda and clean water.
- Dry with a clean cloth.
- Put all food back into the refrigerator.
Defrosting
NOTICE
NOTICE