Norco BIS-6660C, User Manual

Page: 36 / 69

BIS-6660C
User Manual
24
Chapter 4 BIOS SETUP
AMI BIOS FLASH
BIOS functions as a bridge connecting hardware and operating system. Hardware and
software are upgrading all the time, so when your system goes wrong, for example, your
system can not support the newest CPU, you need to upgrade BIOS to keep up with the latest
technology.
FPT64.EFI is the FLASH IC read-write program to load motherboard BIOS, which needs to be
run under Shell.
Press F11 when the computer starting up, select UEFI: Built-in EFI Shell to enter Shell, then
enter the device that stores BIOS (e.g. fs0 :). Then use FPT64.EFI to upgrade the BIOS
（
e.g.
write****.ROM into FLASH IC
）
.
Operational Commands:
A:\ FPT64.EFI -f ****.bin
Note:
1. BIOS Flash is only executed when it is necessary
2. Please use the BIOS SETUP Utility in the CD-ROM provided by us or download the latest
version on related websites
3. Please do not power off or reboot the system when flash BIOS, otherwise, the BIOS may be
damaged or system may not be able to boot again.
4. After finishing BIOS Flash, load the optimal defaults manually
5. To prevent any unexpected problems, please backup your BIOS in advance.
AMI BIOS Description
When the computer is power on, BIOS will conduct self-diagnosis to its hardware on
motherboard and configure hardware parameter; finally the operating system will take control.
BIOS is the communication bridge between hardware and O/S. Correct configuration of BIOS
is critical for maintaining system stability and its optimized performance.
BIOS Setting
1. Power on or restart the system, self-detection message will display on the screen.