Norco BIS-6660C, User Manual

Page: 29 / 69

BIS-6660C
User Manual
18
of previous system settings and back to the original system setting (factory default).
Steps:
（ 1 ） Turn off the computer and disconnect the power supply;
（ 2 ） Use jumper cap short JCC Pin1 and Pin2 for seconds ( Pin1-2) and then restore the
default setting with Pin2-3 connected;
（ 3 ） Turn on the computer, then press “DEL” key to enter BIOS setting and reload optimal
defaults;
（ 4 ） Save and Exit.
JCC
：
Setting JCC
1-2 Clear CMOS; BIOS back to factory default
2-3 Normal Status, System Default
Do not clear CMOS when the computer is still connected to power supply, otherwise, it
will cause damage to the motherboard.