Norco BIS-6660C, User Manual

Page: 34 / 69

BIS-6660C
User Manual
23
1
）
System Power LED Pins
（
Pin1/2 for PWRLED
）
Connect system power LED cable with these pins. （ pin 1 is LED anode ） When system is power
on, power LED is on ； when system is power off, power LED is off.
2
）
HD LED Pins
（
Pin3/4 for HDD LED
）
There is one HD LED on the case panel indicating HD status. When the hard disk reads and
writes, the LED will flash, indicating the device is working. Connect the LED cable to the LED
pins ( Pin3 is LED anode).
3
）
Buzzer Pins
（
Pin5/6 for SPEAKER
）
External Speaker Pins
4
）
Reset Button Pins
（
Pin7/8 for RESET
）
Connect the reset button cable to these two pins. When system fails, reset button can make the
system continue to work and no need to turn on / off the power.
5
）
Power Button Pins
（
Pin 9/10 for POWER BUTTON
）
Connect these two pins to the bounce switch on the chassis to power on or power off the
machine.
3.3.5 SO-DIMM Slot
Board provides 2x dual channel SO-DIMM slots to support DDR3L 1333MHz memory up to
8GB.
3.3.6 MINI PCIe Socket
（
MINI PCIe1, MINI PCIe2, J10, J11
）
Board provides 2x MINI PCIe slots. If you use the Mini PCIE WiFi, the status of which will be
determined by the wireless network that you choose.(MINI PCIe1 supports standard MINI PCIe
port and 3G module; MINI PCIe2 supports standard MINI PCIe port and EPC/mSATA SSD
optional
（
two functions alternative
）
. J10 is the LED for Mini PCIe1 device. J11 is the LED for
Mini PCIe2 device.