Norco BIS-6620, User Manual

Page: 57 / 64

BIS-6620
Based on
Menlow Platform
Mini PC
43
Appendix
Appendix 1: Driver Installation
Please install the driver as per the following steps:
Insert the programmed disk into CD-ROM, so installation of the driver can be made either
automatically or manually. Now manually installation instructions are given as below (Take the
installation of video card drivers as an example):
1) A variety of options are available regarding manually installation, which you can check from
Device Manager.
2) Right click “my computer ", select "management", and go to “Device Manager"
3: Right-click the display controller under the display card item, select “Properties”, click “Driver’,
and select “Update Driver”.
4: Select "Show a list of all drivers at the specified location so that you can select from the list",
and then click Next.
5: Select the location of the display driver, and then click “OK”.
6: Install and restart the system.
After restarting the system, follow the steps above to install other drivers until all
programs are installed. After the driver is fully installed, the user can go to the Device
Manager and see that the device is working.