Norco BIS-1280A40, User Manual

Page: 31 / 39

BIS-1280A40 User Manual
sudo apt-get install exfat-fuse exfat-utils
4.1.7 3G/4G
The driver should be customized according to the 3G module used by the customer. The
default automatic compatibility support is HUAWEI ME909 and Quectel EC20.
HUAWEI dial up
：
echo -e "AT^NDISDUP=1,1,\"CMNET\"\r" > /dev/ttyUSB0;
echo -e "AT+CGDCONT?" > /dev/ttyUSB2;
echo -e "AT^NDISDUP?" > /dev/ttyUSB2;
echo -e "AT^NDISDUP=1,1" > /dev/ttyUSB2;
dhclient -i wwp129s0u3c2
Quectel dial up
：
./quectel-CM -s ctnet &
4.1.8 Ethernet
Support
，
Plug in the Ethernet cable
Input dhclient instruction
，
then ifconfig can see the IP in the corresponding network port.
4.1.9 DI
Corresponding node
：
/dev/norco:di1
——
/dev/norco:di12
Instructions: Download the DI test program to the USB flash disk, and insert the USB flash disk
into the USB port.
Loading USB flash disk
：
mount /dev/sdX1 /mnt/ (sdX1 represents the device name of the
USB flash disk)
Enter the USB flash disk directory
：
cd /mnt
Run DI test program in USB flash disk
：
./DI_test
4.1.11 DO
Corresponding node
：
/dev/gpio_do:1
——
/dev/gpio_do:4
Instructions: Download the DO test program to the USB flash disk, and insert the USB flash
disk into the USB port.
Loading USB flash disk
：
mount /dev/sdX1 /mnt/ (sdX1 represents the device name of the