11
MAINTENANCE
The TWC is engineered to be a low maintenance tool. Under normal operation maintenance is not required.
However, at 6 monthly intervals or after 25,000 applications it is prudent to grease the leadscrew located
within the box section.
Greasing Procedure
1) Ensure the TWC drive wheel is in home position.
FIGURE 21 –
Extreme Minimum Position
(Home Position)
2) Unscrew the button head cap screw in line with the drive wheel.
FIGURE 22 –
Removing Button Head Cap Screw
3) Inject 50% of the grease into the hole using a syringe.
FIGURE 23 –
Applying Grease