MyoMOTION Data Logger User Manual
P-2628 Rev B
8
Step 3
Double-Click on the Noraxon
Master Sync Icon to insert the
MyoSync into the hardware setup.
Note:
The MyoSync Icon will not be displayed if
the device is not attached to the USB port of
the computer. If absent go back to step 2.
Step 4
There is no further configuration for
the MyoSync, but every system
utilizing the sync pulse will need to
be configured to accept a Sync In
pulse. This process will vary
depending on the system, but is
generally done during the Hardware
Setup under configure device.
Step 5
For each system utilizing the sync
signal, if the user would like to
visually see the sync signal for
verification or to synchronize with
certain cameras, the Sync channel
will have to be selected in the
Measurement Setup.