MyoMOTION Data Logger User Manual
P-2628 Rev B
6
1b MyoSync (side)
1 USB Port – A to B style to USB connection
2 External Sync Port – Sync in allows the
MyoSync to accept a sync signal from
another source and time
3 Invert Signal – Inverts or does not invert
the sync signal depending on the direction
of the switch
Component Interconnections
Step 1
Insert the mating (smaller) end of the
USB cable (CBL2) into the USB
connector on the side of the MyoSync.
Insert the opposite end of the USB
cable into an available USB port on the
computer.
Step 2a
If using an external source to generate
the sync pulse, plug the sync cable
from the external source into the
external sync port.
Step 2b
If using wireless sync, insert the
wireless sync transmitter into the
wireless sync port.
Step 2c
Plug in the sync cables for the systems
receiving a sync pulse from the
MyoSync into the Sync Out ports. The
other end will plug into the Sync In
port of the system.
