NORAUTO 46866, Instruction Manual

Page: 94 / 110

94
POWER TOOL USE AND CARE
WARNING
Do not force the power tool. Use the correct power tool for your application� The correct
power tool will do the job better and safer at the rate for which it was designed�
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired�
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally�
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users�
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools�
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in
a hazardous situation�
Use auxiliary handles (if) supplied with the tool. Loss of control can cause personal
injury.
SERVICE
WARNING
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained�
Follow instructions in the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions may create a risk of shock or injury�
SPECIFIC SAFETY RULES AND/OR SYMBOLS
WARNING Hold power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring or its own cord. Fasteners
contacting “live” may make exposed metal parts of the power tool “live” and could give the
operator an electric shock�