22
11.
Connect the 3-pin shroud on C13 to T3 on C11. Insert the tee on C13 between the
connectors on the bypass valve. For pull-type machines, the bypass valve is located near the
front of the machine on the right-hand sprayer frame rail. On self-propelled machines, the
bypass valve is located directly above the rear axle between the axle and tank.
12.
Connect the 6-pin tower on C03 to the 6-pin shroud on C11. Connect the 2-pin
connectors on C03 to the NORAC valve block, as shown in
Figure 21
.
13.
The connectors on the valve cable (C03) are marked
RIGHT UP
,
LEFT UP
,
RIGHT
DOWN
and
LEFT DOWN
. Cables labeled with
UP
go on the same side as the
hydraulic hoses.
Figure 21: Valve Cable Connections
14.
Fasten the 8-way coupler to the boom with cable ties. Connect P6 on C11 to the 8-way
coupler.
15.
Connect both roll sensors to the 8-way coupler.
16.
Connect two cables (C05) to the 8-way coupler and route along the booms to the wing
sensors. Follow existing cables and hoses to be sure the cable will not be pinched or
stretched.
17.
At the sensor brackets, attach a 2-way coupler with terminator (E20) to the sprayer boom.
The 2-way coupler with terminator is the white two way coupler. Plug the sensor and the
CANbus cable into the 2-way coupler.
IMPORTANT:
Provide enough slack in all cables to account for the movement of the main
section, parallel lift, and FOLDING boom movement.
Summary of Contents for UC4.5
