8
NookBox
Installation Guide
Keypad
Dual-key Alarm function
» Panic Alarm — Press both
1
and
3
keys to trigger Panic alarm.
» Fire Alarm — Press both
4
and
6
keys to trigger Fire alarm.
» Medical Alarm — Press both
7
and
9
keys to trigger Medical alarm.
<NOTE>
•
The dual-key alarm function is disabled by default. To enable it, please refer to the
Test Mode
section.
General Operation
» If there is
Alarm Memory
, the Status Blue LED and fault LED will turn ON with 5 beeps (depending on Control Panel).
» Enter Test mode — Enter
Keypad PIN code
and then press
*
key.
» Panic Alarm — Press
1
key +
3
key at the same time. (if the function is enabled)
» Fire Alarm — Press
4
key +
6
key at the same time. (if the function is enabled)
» Medical Alarm — Press
7
key +
9
key at the same time. (if the function is enabled)
» Check Control Panel Status — Normal Mode Press
key.
•
Red LED on: the system is in
Away Mode
•
Red LED flash: the system is in
Home Mode
.
•
Blue LED on: activation of
Disarm Mode
.
•
Blue flash: failure due to the following reasons:
•
No response sent by the control panel within 4 seconds.
•
PIN code was incorrect.
•
Request for
Home mode
during
Arm mode
.
•
Request for
Force arm
.
