4
NookBox
Installation Guide
Keypad
LED Indicator
Active LED (Blue/Amber)
• Blue LED on 5 seconds: the system is in Normal Operation Mode.
• Blue LED flashes for 5 seconds:
low battery in Normal Operation Mode
.
• Amber LED on: the system is in
Test Mode
.
• Amber LED flash:
low battery in Test Mode
.
<NOTE>
•
Active Blue LED will turn on at any key press, after successful completion of a valid keystroke sequence, or when the keypad idles for 5 seconds.
•
When the Active Blue LED turns off before a valid keystroke sequence is completed, the previous entered keys are ignored.
Status LED (Blue/Red):
• Red LED on: the system is in
Away Mode.
• Red LED flash: the system is in
Home Mode
.
• Blue LED on: activation of
Disarm Mode
.
• Blue LED flash: failure due to the following reasons:
» No response sent by the control panel within 4 seconds.
» Control Panel User PIN code was incorrect.
» Request for
Home
mode during
Arm
mode.
» Request for
Force arm
.
Fault LED (Amber):
• Flash: system failure (panel tamper, AC fault, sensor temper, sensor out of order, open door)
• On: Alarm Memory (depend on Control Panel).
