7
NookBox
Installation Guide
Smoke Mini Detector
Installation
Installation Guideline
• It is recommended that the installation site be in the center area of the ceiling.
• Do not locate the detector in the following locations:
» The Kitchen – Smoke from cooking might cause an unwanted alarm.
» Near a ventilating fan, florescent lamp or air-conditioning equipment – air drafts from them may affect the
sensitivity of the detector.
» Near ceiling beams or over a cabinet – stagnant air in these areas may affect the sensitivity of the detector.
» In the peak of an “A” frame type of ceiling.
Installation Recommendation
• It is recommended to install the Smoke Detector in the following locations.
» In a ceiling area with full view of its detection coverage unobstructed by appliances and furniture.
» Near the entrance of a room or house to monitor entry activity.
• Limitations
» Do not install the Smoke Detector exposed to direct sunlight.
» Avoid installing the Smoke Detector in areas where devices may cause rapid change of temperature in the detection area, i.e. air
conditioner, heaters, etc.
» Avoid large obstacles in the detection area.
» Do not pointing directly at sources of heat e.g. Fires or boilers, and not above radiators.
» Avoid moving objects in the detection area i.e. curtain, wall hanging etc.
• Press the Test Button to enter Test Mode. Walk around the protected area noting when the LED lights up and check that the detection
coverage is adequate.
• When detection coverage is found to be satisfying, installation is now completed.
