manualshive.com logo in svg

Nonin LifeSense LS1-9R, Operator'S Manual

Share
Download
Nonin LifeSense LS1-9R Operator'S Manual Download Page 42

36

Capnography Accessories

Item

Description

Nasal CO

2

 Sample Line

Single-use, disposable, universal sample line with male luer lock 
connectors at both ends. 2.1 m. 
Adult
Pediatric
Infant

Oxygen Delivery CO

2

 

Sampling Nasal Cannula

Single-use, disposable O

2

 delivery sample line with male luer lock 

connector. 
Infant
Pediatric (22 mm ID x 6 mm OD adapter included)
Adult (22 mm ID x 6 mm OD adapter included)

CO

2

 Sample Line

Single-use, disposable 2.1 m. Universal sample line with male luer lock 
connectors on both ends.

Straight T-Connector

Single-use, disposable gas sampling port, 15 and 22 mm connector ends. 
For use with CO

2

 sample line to connect monitor to a main stream. 

PermaPure Nafion 
Tubing

Single-use, disposable Nafion tubing to remove water vapor from the 
sample line.

Verification Gas

Verification gas and tubing. Contains 5 Vol% of CO

2

 (equals 38 mmHg or 

5.3 kPa). To be used with a gas valve.

Gas Valve for 
Verification Gas

Reusable gas valve and tubing for controlling the flow from the verification 
gas.

Calibration Apparatus

Used for 0-point calibration.

Moisture Trap with Filter

10 packages containing 1 single-use disposable moisture trap and 
1 single-use disposable filter each.

Filters

Available in 25 or 100 pack.

Summary of Contents for LifeSense LS1-9R





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands