manualshive.com logo in svg

Nonin LifeSense LS1-9R, Operator'S Manual

Share
Download
Nonin LifeSense LS1-9R Operator'S Manual Download Page 40

34

Accessories

LifeSense is designed to be used with Nonin-recommended accessories only. Use of other 
brands will compromise the function and performance. The following list of accessories can be 
ordered from Nonin or your distributor. Nonin may update the accessories list at any time. It is 
the purchaser’s responsibility to always ask for the current list, by model number, when ordering 
accessories.

Monitor Accessories

Item

Description

Power Supply

Approximately 100 – 240 VAC 50 – 60 Hz 

Monitor Mounting 
Bracket

Connector that enables adjustable mounting and hospital standard mounting. 
Delivered with 3 screws for connecting to the back of the monitor.

Adjustable Mounting 
Clamp

Allows mounting to 20 – 50 mm (0.8 – 2.0 in.) diameter poles.

TrendSense/
TrendSense W

Data memory modules. Dimensions 38x32x17mm. The module does not 
contain a battery; it draws power from the host. PC software and cable 
included.
• TrendSense logs EtCO

2

, respiration rate, pulse and oxygen saturation once 

per second for more than 72 hours. 

• TrendSense W logs EtCO

2

, respiration rate, pulse and oxygen saturation 

four times per second for up to 36 hours and can generate capnograms in 
Excel charts. 

Note:

 A TrendSense module cannot be used at the same time as the NC1, 

Nurse Call Accessory.

NC1 Sens Nurse Call 
Accessory Cable

Designed for Nonin LifeSense monitoring device to remotely connect to 
healthcare facility Nurse Call system. Default setting is Continuous Normally 
Open.

Note:

 NC1, Nurse Call Accessory cannot be used at the same time as 

TrendSense.

Carrying Case 

Protective carrying case in which the monitor can be fully connected without 
removing the bag.

Summary of Contents for LifeSense LS1-9R





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands