manualshive.com logo in svg

Nonin LifeSense LS1-9R, Operator'S Manual

Share
Download
Nonin LifeSense LS1-9R Operator'S Manual Download Page 15

9

Table 1: Start-up Screen Icons and Display Descriptions

No.

Name

Description

1.

Audible Alarm 
Disable

Pressing this icon turns the audible alarms off. 

It disables the audible alarms by setting all lower limits to 0.

2.

Audible Alarm 
Enable

Pressing this icon turns the audible alarms on. 

Default if no icon is chosen.

3.

≤

30kg/66lbs

Pressing this icon selects the default alarm limits for patients 
weighing 30 kg (66 lbs) or less. 

Only available if Audible Alarm Enable icon is chosen on previous 
screen.

4.

>30kg/66lbs

 

Pressing this icon selects the default alarm limits for patients 
weighing more than 30 kg (66 lbs). 

Only available if Audible Alarm Enable icon is chosen on previous 
screen.

5.

LifeSense Version

Shows LifeSense version.

If an error occurs during start-up, an error number displays here 
and an alarm activates.

6.

Software Revision 
Level 

SW: REV

Shows the software revision level installed on the LifeSense 
monitor.

 

 

Summary of Contents for LifeSense LS1-9R





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands